INTRODUCTION

The objective of this project is to control the status of a door with the use of two buttons.
By using an ultrasonic sensor, is possible to detect a person that is close to the door. A blue LED will indicate when someone is at the door. With the use of the buttons, you can open and close the door.
A red LED will indicate when the door is closed, and a green LED will turn on when is open.
The LCD screen will show the status of the door with text.

Components

1x  Arduino UNO
1x Breadboard
3x LED
2x Push Button
1x Servo Motor
5x Resistor 220 ohm
1x Ultrasonic Sensor
1x LCD Screen
1x I2C Serial Adapter

Door Control is a project of IAAC, Institute for Advanced Architecture of Catalonia developed at Master in Advanced Architecture in 2021 by Student: Brian Woodtli and faculty: Cristian Rizzuti, faculty assistant: Arman Najari.